11-12-2009 03:11 AM - edited 03-21-2019 01:46 AM
Hi all, I have a problem with the incoming calls. I hear only one tone and the next a busy signal. I don't know if the configuration is correct, the outgoing calls working fine.
Many thanks for all.
Best Regards.
M.Castilla
Solved! Go to Solution.
11-12-2009 10:31 AM
This community is for Cisco Small Business products such as the UC500, not the 1700.
Looking at the config, I see no inbound dial peers or routing for the inbound dial peers.
These might help.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010ae1c.shtml
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml
If you still need help, I would recommend the netpro forums.
www.cisco.com/go/netpro/
11-12-2009 10:31 AM
This community is for Cisco Small Business products such as the UC500, not the 1700.
Looking at the config, I see no inbound dial peers or routing for the inbound dial peers.
These might help.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010ae1c.shtml
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml
If you still need help, I would recommend the netpro forums.
www.cisco.com/go/netpro/
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide