ACL in Controller 4404

Answered Question
Nov 12th, 2009
User Badges:

Hi.

I read CWCS Configuration Guide release 5.1 about ACL, applied ACL to WLAN, but didn't work.


I want to restrict wireless client access any networks.


If anyone knows, please help me.


Thks.


Paulo Maurício

Correct Answer by dancampb about 7 years 8 months ago

Keep in mind with ACLs on the controller they are written with the assumption that you are on the controller and traffic is coming from the wireless clients in regards to the inbound and outbound directions. Also you need to write an inbound and outbound rule for each condition. They aren't like IOS ACLs that will automatically allow the return traffic through.


http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807810d1.shtml


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
dancampb Thu, 11/12/2009 - 11:15
User Badges:
  • Cisco Employee,

Keep in mind with ACLs on the controller they are written with the assumption that you are on the controller and traffic is coming from the wireless clients in regards to the inbound and outbound directions. Also you need to write an inbound and outbound rule for each condition. They aren't like IOS ACLs that will automatically allow the return traffic through.


http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807810d1.shtml


paulo.s Fri, 11/13/2009 - 06:44
User Badges:

Ok, it works!!!


I found the error. I was configuring by WCS, and when I configured protocol to ANY, returned this message: Protocol : 256 : Value for this attribute is invalid. (Valid Range: is 0 <> 255 )


My WCS version is Version 5.1.64.0, and controller software version is 4.2.112.0.


Thks for help.

Actions

This Discussion

 

 

Trending Topics - Security & Network