Remote Agent installation windows 2003 issue.

Answered Question
Nov 14th, 2009

Dear Team,

I am facing a issue in RA agent installation in win2003.

Details:-

1.windows 2003 server r2 service pack 2

2.Remote agent 4.1.4.13.16

3.OS 32 bit version

Kindly advice

Regards,

Subash.c

I have this problem too.
0 votes
Correct Answer by Jagdeep Gambhir about 7 years 2 months ago

Hi Subash,

This is a patch for release 4.1.4. Acs 4.1.4 must be installed before installing this patch.

Instructions on how to install the patch

========================================

1. Make sure for Cisco Secure ACS Agent 4.1.4.13 is installed.

2. Extract files NTlib.dll , CSLogAgent.exe , CSAgent.exe,CSWinAgent.exe , NAS.dll,ConsoleDLL.dll , csvLog.dll , EndPoint.dll & odbcLogger.dll from Acs-4.1.4.13.16-RA.zip

3. Stop Cisco Secure ACS Agent service.

4. Locate CiscoSecure ACS Agent\bin and save a copy of current NTlib.dll , NAS.dll,CSAgent.exe,CSLogAgent.exe , CSWinAgent.exe & EndPoint.dll

5. Copy NTlib.dll , CSLogAgent.exe , CSAgent.exe,NAS.dll,CSWinAgent.exe & EndPoint.dll files extracted from zip to CiscoSecure ACS Agent\bin

6. Locate CiscoSecure ACS Agent\Support and save a copy of current ConsoleDLL.dll , csvLog.dll & odbcLogger.dll

7. Copy ConsoleDLL.dll , csvLog.dll & odbcLogger.dll extracted files from zip to CiscoSecure ACS Agent\Support

6. Start Cisco Secure Agent Service.

Regards,

~JG

Do rate helpful posts

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jagdeep Gambhir Sat, 11/14/2009 - 07:21

Hi Subash,

This is a patch for release 4.1.4. Acs 4.1.4 must be installed before installing this patch.

Instructions on how to install the patch

========================================

1. Make sure for Cisco Secure ACS Agent 4.1.4.13 is installed.

2. Extract files NTlib.dll , CSLogAgent.exe , CSAgent.exe,CSWinAgent.exe , NAS.dll,ConsoleDLL.dll , csvLog.dll , EndPoint.dll & odbcLogger.dll from Acs-4.1.4.13.16-RA.zip

3. Stop Cisco Secure ACS Agent service.

4. Locate CiscoSecure ACS Agent\bin and save a copy of current NTlib.dll , NAS.dll,CSAgent.exe,CSLogAgent.exe , CSWinAgent.exe & EndPoint.dll

5. Copy NTlib.dll , CSLogAgent.exe , CSAgent.exe,NAS.dll,CSWinAgent.exe & EndPoint.dll files extracted from zip to CiscoSecure ACS Agent\bin

6. Locate CiscoSecure ACS Agent\Support and save a copy of current ConsoleDLL.dll , csvLog.dll & odbcLogger.dll

7. Copy ConsoleDLL.dll , csvLog.dll & odbcLogger.dll extracted files from zip to CiscoSecure ACS Agent\Support

6. Start Cisco Secure Agent Service.

Regards,

~JG

Do rate helpful posts

Actions

This Discussion