VRF + OSPF configuration help

Unanswered Question
Nov 15th, 2009
User Badges:

Hello All,


I'm issues configuring the OSPF for a specific VRF instance. I get the following error (using 3700 12.4(15)T11)


VRFRTR(config)#ROUTER OSPF 100 VRf STUB

%VRF specified does not match this router


However when I configure the address family in EIGRP, ti works.


VRFRTR(config)#router eigrp 12

VRFRTR(config-router)#address-family ipv4 vrf STUB

VRFRTR(config-router-af)#exit


Here is the output of show ip VRF:


VRFRTR#show ip vrf

Name Default RD Interfaces

NSSA 30:30 Se2/2

Se1/2

STUB 10:10 Se2/0

Se1/0

TSNSSA 40:40 Se2/3

Se1/3

TSTUB 20:20 Se2/1

Se1/1

VRFRTR#



Any Ideas what im missing? .. I've attached my router configuration.


(btw this is a home lab for CCIE W test. Trying to be smart using VRF's to simulate 8 routers using only 3 routers.)



Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Reza Sharifi Sun, 11/15/2009 - 16:21
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 LAN

Merrylle,


Can you post "sh ver" here?


Reza

merryllem Sun, 11/15/2009 - 21:22
User Badges:

I figured out the problem. I was copy and pasting the VRF lines. Not sure why when i typed it in it worked.


- I did verify copy and paste does not work.

Actions

This Discussion