Bundle Two links on EIGRP

Unanswered Question
Nov 16th, 2009


our branch office is connected to the head office via one E1 link(point to point) and communicates through EIGRP. Now we have got another E1 link and we need to club both of the lines( which are on different interfaces ). As per the documentation both the interfaces of the two routers should be in the same subnet. How can we configure two wan interfaces within the same subnet and how do we resolve the IP overlap issue.


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Paolo Bevilacqua Mon, 11/16/2009 - 04:14

Interface not need to be in the same subnet.

You can report the documentation error using the feedback form.

Note if you are the end user, recommend you hire a networking professional for best results.

ravinderrajput Mon, 11/16/2009 - 04:19

thanks for the reply..

if the interfaces need not be in the same subnet, then how do we bundle them.

Is it possible to do such thing.?

Paolo Bevilacqua Mon, 11/16/2009 - 04:22

EIGRP does not bundle anything, it is a routing protocol.

Again, since evidently you are not a network engineer, I recommend you give this task to a certified one.


This Discussion