Solved: Services Overhead

Kevin Brennan · ‎11-16-2009

Hi All,

I'm looking for a sizing guide for the ISR's that would indicate what the overhead of L2TPv3 would be.

I'm familar with the router performance guide with the PPS figures, but I have never seen a guide that quotes what the services overhead would be.

My requirements are something that will provide at least 20Mb full duplex of L2TPv3 throughput. There will be no other services running. The two routers will be connected by a 100Mb L3 service.

I'm hoping that the 2811, or maybe even the 2801 might be up to the task.

Any info anyone could provide would be great.

Thanks

Kevin

Giuseppe Larosa · ‎11-17-2009

Hello Kevin,

only performing tests over some hours can tell you if the device fits your needs.

Hope to help

Giuseppe

View solution in original post

Giuseppe Larosa · ‎11-17-2009

Hello Kevin,

only performing tests over some hours can tell you if the device fits your needs.

Hope to help

Giuseppe

Kevin Brennan · ‎11-17-2009

Hi Giuseppe,

I was afraid that would be the answer.

I'm working in a small enough company, so we dont have the resources to buy kit just to test it.

Do you know if Cisco VAR's will setup a test lab for customers?

Thanks

Kevin