Wireless AP design for Wireless IPPhone 7921

Unanswered Question
Nov 16th, 2009
User Badges:

FOr a client they are asking 40 Wireless IP Phone, with 3 floors, IPT side I am clear in design, but for access point design I am bit confused with standalone and WLC design.

Could please light me on Wireless design for standalone AP and WLC controller with AP , in the design plan to give both as options.

And also how to confirm a AP is a standalone or it wil work only with WLC.

Please light me with wireless design for IPT.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jonathan Schulenberg Tue, 11/17/2009 - 06:25
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

I would suggest you subcontract this to a partner who is familiar with wireless voice designs. There are a lot of details and caveats to make sure it works.

For example: autonomous APs are not viable for voice installations. You need a controller to prevent the roam times from interrupting the call.

At a minimum, you should read the Voice over Wireless LAN Design Guide:



This Discussion