ios

Answered Question
Nov 16th, 2009
User Badges:
  • Blue, 1500 points or more

Hi,


Has anyone using IOS 12.2(44)SE2 for Catalyst Switches ever notice that "show version" output is strange?


It shows the DRAM usage as "with 0K/12280K bytes of memory." and doesn't show the FLASH at all.


TIA

Dandy


Correct Answer by Jerry Ye about 7 years 4 months ago

Just in case you still interested. The bug ID is CSCsq70343.


Regards,

jerry

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.3 (3 ratings)
Loading.
iyde Fri, 11/20/2009 - 12:15
User Badges:
  • Silver, 250 points or more

Hi Dandy.


Don't know for sure, but I believe that I have seen a bug reported regarding this issue, i.e. the IOS version erroneously does not show the right amount of memory.

You could try to upgrade to a newer version of IOS and see if it amkes a difference.


HTH, Ingolf

Danilo Dy Sat, 11/21/2009 - 10:06
User Badges:
  • Blue, 1500 points or more

Hi Ingolf,


Thanks for your reply.


I was looking for a bug about this but I can't find one. Anyway, I'm upgrading them soon to avoid more problems.


Best wishes,

Dandy

Leo Laohoo Sat, 11/21/2009 - 14:53
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

I'm not sure what model your switch is but you can upgrade to 12.2(46) or the 12.2(50) and higher version. 

If you upgrade to the 12.2(50) and higher, please don't be alarmed if the first-time-boot process takes twice as long as this IOS will upgrade the bootstrap (one off).

Correct Answer
Jerry Ye Sat, 11/21/2009 - 20:08
User Badges:
  • Cisco Employee,

Just in case you still interested. The bug ID is CSCsq70343.


Regards,

jerry

Actions

This Discussion