cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
752
Views
8
Helpful
4
Replies

ios

Danilo Dy
VIP Alumni
VIP Alumni

Hi,

Has anyone using IOS 12.2(44)SE2 for Catalyst Switches ever notice that "show version" output is strange?

It shows the DRAM usage as "with 0K/12280K bytes of memory." and doesn't show the FLASH at all.

TIA

Dandy

1 Accepted Solution

Accepted Solutions

Just in case you still interested. The bug ID is CSCsq70343.

Regards,

jerry

View solution in original post

4 Replies 4

iyde
Level 4
Level 4

Hi Dandy.

Don't know for sure, but I believe that I have seen a bug reported regarding this issue, i.e. the IOS version erroneously does not show the right amount of memory.

You could try to upgrade to a newer version of IOS and see if it amkes a difference.

HTH, Ingolf

Hi Ingolf,

Thanks for your reply.

I was looking for a bug about this but I can't find one. Anyway, I'm upgrading them soon to avoid more problems.

Best wishes,

Dandy

I'm not sure what model your switch is but you can upgrade to 12.2(46) or the 12.2(50) and higher version. 

If you upgrade to the 12.2(50) and higher, please don't be alarmed if the first-time-boot process takes twice as long as this IOS will upgrade the bootstrap (one off).

Just in case you still interested. The bug ID is CSCsq70343.

Regards,

jerry

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: