POE Error on 4500

Unanswered Question
Nov 17th, 2009

Hi,


I'm seeing the following error on a 4500 running 12.2(46)SG


C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Module 5 inline power exceeds threshold: status changed to 'Pwr Over'


All the ports on module 5 have "power inline never" applied, in fact the whole switch has POE disabled.


I've attached a txt file with the show power detail output.


Do I have a problem with the module, backplane ??


Thanks in advance.



Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Tue, 11/24/2009 - 09:15

Hello Richard,

you shouldn't have hardware related problems and if you are not using POE you are not affected by this.


my wild guess is a SW bug.


Hope to help

Giuseppe

jmacaulay Fri, 01/27/2012 - 09:30

In 12.2(50)SG6 and SG8 I had the same problem.  This is what resolved my problem:


I was able to resolve this issue by using doing the following on the modules that had “Pwr Over”:


     Interface range gig 4/1-48

     Power inline never

     Exit

     Interface range gig 4/1-48

     Power inline auto


It must recompute inline power.....

Actions

This Discussion