11-17-2009 01:07 AM - edited 03-06-2019 08:38 AM
Hi,
I'm seeing the following error on a 4500 running 12.2(46)SG
C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Module 5 inline power exceeds threshold: status changed to 'Pwr Over'
All the ports on module 5 have "power inline never" applied, in fact the whole switch has POE disabled.
I've attached a txt file with the show power detail output.
Do I have a problem with the module, backplane ??
Thanks in advance.
11-24-2009 09:15 AM
Hello Richard,
you shouldn't have hardware related problems and if you are not using POE you are not affected by this.
my wild guess is a SW bug.
Hope to help
Giuseppe
01-27-2012 09:30 AM
In 12.2(50)SG6 and SG8 I had the same problem. This is what resolved my problem:
I was able to resolve this issue by using doing the following on the modules that had “Pwr Over”:
Interface range gig 4/1-48
Power inline never
Exit
Interface range gig 4/1-48
Power inline auto
It must recompute inline power.....
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: