UC520 creating vlans not routing to internet

Unanswered Question
Nov 18th, 2009
User Badges:

I'm having a problem with a UC520 not routing properly.


I currently have 3 vlans. The two created by the UC,plus an addition vlan for retail customers.


I'm able to connect and route data between the data and the retail, but when I try to get to the internet from the 3rd vlan, everything times out. The current configuration, is a uc500 connected to CE switch, and ap. The uc is connected to an asa 5505.



any suggestions?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
David Trad Wed, 11/18/2009 - 17:59
User Badges:
  • Gold, 750 points or more
  • Cisco Designated VIP,

    2013 Small Business

Hi Frank,


Can you please post your config with all sensitive information removed, it is a bit hard to provide you some reasonable answers without first knowing what exactly has been configured, we could stab in the dark but then ends up becoming somewhat frustrating.



Cheers,



David.

Marcos Hernandez Fri, 11/20/2009 - 13:56
User Badges:
  • Blue, 1500 points or more

Make sure you have NAT in place for that new VLAN.


Marcos

Actions

This Discussion