Issue in Tunnel re-establishment

Unanswered Question
Nov 19th, 2009
User Badges:

Hi,


I successfully establised the IPsec between 2 end points which consistes of ASA followed by a router on both ends. Then i configured the GRE Tunnel between 2 end and configured OSPF. No problem in OSPF Neighbour formation. But, couple of issues


  1. When the Router reloads then the GRE is not establishing unless i execute the "clear xlate" on the ASA. when i clear the tunnel everything is working fine. Tunnel is back to normal
  2. Inorder to overcome the above issue I change the default tunnel mode to "tunnel mode ipip". The tunnel is reestablishing automatically when the router reloads and i dont have to clear the tunnel. But the OSPF is not working when "tunnel mode ipip" is used.


What could be the reason for this


Regards

Logesh

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Fri, 11/20/2009 - 10:18
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Logesh,

you may want to post this in security -> firewall forum.


OSPF over GRE tunnel works, I never heard of OSPF over that other tunnel mode.


You should look for a solution that allows you to use GRE tunnel between routers.



Hope to help

Giuseppe

Actions

This Discussion