I would like to find a solution to the following problem:
We will be replacing a Siemens Hicom PBX (connected to the provider via PRI) with a a Cisco VoIP solution (1x 2801 Voice Gateway with 1x PRI, 2x CUCM). At the moment the old PBX is providing BRI connections to several users at the site. These BRI connections have numbers within the PRI number range.
Can I accomplish this with the Cisco (or 3rd party) solution? Would be grateful for any advice!
There is an EVM cards with 4 BRI, plus 4 more on a daughtercard. It also gives you 8 FXS.
That plus 6x BRI (on 3x VIC2s) would at least give you 14 BRIs on a 2811, not too bad.