×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

HUM 1.2 and Windows 2008 - Server

Answered Question
Nov 20th, 2009
User Badges:

Hello,


it is possible to run HUM with Windows 2008-Server? Problem is: It runns always CWLMS 3.2 and the customer wantes to add HUM. The hardware is not the problem.

Correct Answer by Joe Clarke about 7 years 9 months ago

Yes, HUM 1.2 comes with LMS 3.2 which can be installed on a Windows 2008 server.  You don't need to install all of LMS 3.2 to get HUM.  You can just install Common Services 3.3, CiscoWorks Assistant, The CiscoWorks Portal, then HUM.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Joe Clarke Sun, 11/22/2009 - 15:57
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Yes, HUM 1.2 comes with LMS 3.2 which can be installed on a Windows 2008 server.  You don't need to install all of LMS 3.2 to get HUM.  You can just install Common Services 3.3, CiscoWorks Assistant, The CiscoWorks Portal, then HUM.

Farrukh Haroon Sun, 11/22/2009 - 23:34
User Badges:
  • Red, 2250 points or more

There is both client and server support for Windows 2008 in Ciscoworks LMS starting with release

3.2 (Common Services V3.3). Please have a look at the following links:


http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.3/release/notes/cs33rel.html#wp79176


http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/overview.html#wp1086601


Regards


Farrukh

Actions

This Discussion