Configuring SSID - VLAN

Unanswered Question
Nov 20th, 2009

hi,

We have aironet 1121 AP. with only one SSID and only one WEP key.

We need to have two VLAN and corresponding SSID with seperate WEP key for both.

Existing configuration is as given here. Do we need to configure the switch port as trunk and with the native VLAN as that will be configured on the AP?

Do we need to configure AP - gi0  interface as a trunk? Can we keep the bv1 IP address same and add one more SSID and VLAN so that we will not loss the connectivity of the AP. In this case it is DHCP reservation in our DHCP server.

sh runn
Receiving#sh running-config
Building configuration...

Current configuration : 1684 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Receiving
!
no logging console

!
ip subnet-zero
!
ip dhcp pool local-default-pool
   network 10.0.0.0 255.255.255.224
   default-router 10.0.0.1
   lease 0 0 1
!
!
no aaa new-model
!
dot11 ssid RECEIVING
   authentication open
   guest-mode
!
!
!

!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption key 1 size 40bit 7 915020363C01 transmit-key
encryption mode wep mandatory
!
ssid RECEIVING
!
speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root access-point
payload-encapsulation dot1h
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface BVI1
ip address dhcp client-id FastEthernet0
no ip route-cache
!
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
snmp-server view dot11view ieee802dot11 included
snmp-server community public RW
snmp-server chassis-id receiving
!
control-plane
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login local
!
end

Receiving#

Please share the experience.

Any link on cisco.com is highly appreciable.

Thanks in advance.

Subodh

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

 

 

Trending Topics - Security & Network