E&M card status - UP UP

Unanswered Question
Nov 22nd, 2009
User Badges:
Hi ,
I cannot confrim whether the e&m card are hardware faulty. The users cannot make outgoing call and recieve incoming call.
                                  IN      OUT
PORT   CH SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
====== == ========== ===== ==== ======== ======== ==
1/0/0  -- e&m-imd    up    up   idle     idle     y
1/0/1  -- e&m-imd    up    up   idle     idle     y
1/1/0  -- e&m-imd    up    up   idle     idle     y
1/1/1  -- e&m-imd    up    up   idle     idle     y
Thanks
Leung Che Man
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Mon, 11/23/2009 - 03:57
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Probably just miswired or misconfigured, up indicates the card has seized the circuit.


If it was working before, reload the router.

cm6043 Tue, 11/24/2009 - 18:53
User Badges:

Hi,


I have contacted the local PABX engineer to check the e&m wiring and reloaded the router. The status return to normal as follows and we can make call between other sites.



                                  IN      OUT
PORT   CH SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
====== == ========== ===== ==== ======== ======== ==
1/0/0  -- e&m-imd    up    up   seized   idle     y
1/0/1  -- e&m-imd    up    dorm idle     idle     y
1/1/0  -- e&m-imd    up    dorm idle     idle     y
1/1/1  -- e&m-imd    up    dorm idle     idle     y



Thanks

Leung Che Man

Actions

This Discussion