E&M card status - UP UP

cm6043 · ‎11-22-2009

Hi ,

I cannot confrim whether the e&m card are hardware faulty. The users cannot make outgoing call and recieve incoming call.

                                  IN      OUT
PORT   CH SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
====== == ========== ===== ==== ======== ======== ==
1/0/0 -- e&m-imd    up    up   idle     idle     y
1/0/1 -- e&m-imd    up    up   idle     idle     y
1/1/0 -- e&m-imd    up    up   idle     idle     y
1/1/1 -- e&m-imd    up    up   idle     idle     y

Thanks

Leung Che Man

paolo bevilacqua · ‎11-23-2009

Probably just miswired or misconfigured, up indicates the card has seized the circuit.

If it was working before, reload the router.

cm6043 · ‎11-24-2009

Hi,

I have contacted the local PABX engineer to check the e&m wiring and reloaded the router. The status return to normal as follows and we can make call between other sites.

                                  IN      OUT
PORT   CH SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
====== == ========== ===== ==== ======== ======== ==
1/0/0 -- e&m-imd    up    up   seized   idle     y
1/0/1 -- e&m-imd    up    dorm idle     idle     y
1/1/0 -- e&m-imd    up    dorm idle     idle     y
1/1/1 -- e&m-imd    up    dorm idle     idle     y

Thanks

Leung Che Man