cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
951
Views
0
Helpful
2
Replies

E&M card status - UP UP

cm6043
Level 1
Level 1
Hi ,
I cannot confrim whether the e&m card are hardware faulty. The users cannot make outgoing call and recieve incoming call.
                                  IN      OUT
PORT   CH SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
====== == ========== ===== ==== ======== ======== ==
1/0/0  -- e&m-imd    up    up   idle     idle     y
1/0/1  -- e&m-imd    up    up   idle     idle     y
1/1/0  -- e&m-imd    up    up   idle     idle     y
1/1/1  -- e&m-imd    up    up   idle     idle     y
Thanks
Leung Che Man
2 Replies 2

paolo bevilacqua
Hall of Fame
Hall of Fame

Probably just miswired or misconfigured, up indicates the card has seized the circuit.

If it was working before, reload the router.

Hi,

I have contacted the local PABX engineer to check the e&m wiring and reloaded the router. The status return to normal as follows and we can make call between other sites.


                                  IN      OUT
PORT   CH SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
====== == ========== ===== ==== ======== ======== ==
1/0/0  -- e&m-imd    up    up   seized   idle     y
1/0/1  -- e&m-imd    up    dorm idle     idle     y
1/1/0  -- e&m-imd    up    dorm idle     idle     y
1/1/1  -- e&m-imd    up    dorm idle     idle     y

Thanks

Leung Che Man

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: