11-23-2009 03:46 AM - edited 03-15-2019 08:33 PM
Hi Guys,
I got a RMA for my Cisco 7941, phones and did a factory setting. Now phones is showing "upgrading" nothying moves forward and none of the key is active to any changes. if anybody support me to resolve this please.
Neethan
11-23-2009 03:49 AM
You need to connect the phones to a properly configured CM, CME, or TFTP server so they can compelte the upgrade
.
11-24-2009 10:32 PM
Thanks, but the phones is now resetting after 5-10 second continuously....comeing as "Unprovisioned" ....
11-25-2009 12:22 AM
delete the entry for the phone in cucm and add it in again (do the factory reset again on the phone)
10-20-2010 12:51 PM
Seems the phone is running a SIP firmware.
Assign a DN to your phone or convert it to SCCP
Cyril
10-20-2010 01:57 PM
One year old thread, it's unlikely that the OP still waits for an answer..
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: