Channelizing DS3s - Channel-Group question

Answered Question
Nov 23rd, 2009

Hey all.

I am configuring a 7204 with two DS3 circuits that are being channelized into 28 T1s each. I want to make sure I have them configured correctly before I start turning up circuits.

I have done research but connot find anything for multiple DS3s and creating multiple channel groups on one router.

Correct me if I am wrong but can I just create two channel-groups, one for each card. I know T1s have 24 timeslots. Should this work?

Again I have little experience configuring these circuits. I am going by my research.

controller T3 1/0

framing m23

cablelength 450

t1 1 channel-group 0 timeslots 1-24

t1 2 channel-group 0 timeslots 1-24

t1 3 channel-group 0 timeslots 1-24

t1 4 channel-group 0 timeslots 1-24

t1 6 channel-group 0 timeslots 1-24

t1 7 channel-group 0 timeslots 1-24

t1 8 channel-group 0 timeslots 1-24

t1 9 channel-group 0 timeslots 1-24

t1 10 channel-group 0 timeslots 1-24

t1 11 channel-group 0 timeslots 1-24

t1 12 channel-group 0 timeslots 1-24

t1 13 channel-group 0 timeslots 1-24

t1 14 channel-group 0 timeslots 1-24

t1 15 channel-group 0 timeslots 1-24

t1 17 channel-group 0 timeslots 1-24

t1 18 channel-group 0 timeslots 1-24

t1 19 channel-group 0 timeslots 1-24

t1 20 channel-group 0 timeslots 1-24

t1 21 channel-group 0 timeslots 1-24

t1 22 channel-group 0 timeslots 1-24

t1 23 channel-group 0 timeslots 1-24

t1 24 channel-group 0 timeslots 1-24

t1 25 channel-group 0 timeslots 1-24

t1 26 channel-group 0 timeslots 1-24

t1 27 channel-group 0 timeslots 1-24

t1 28 channel-group 0 timeslots 1-24

controller T3 2/0

framing m23

cablelength 450

t1 1 channel-group 1 timeslots 1-24

t1 2 channel-group 1 timeslots 1-24

t1 3 channel-group 1 timeslots 1-24

t1 4 channel-group 1 timeslots 1-24

t1 6 channel-group 1 timeslots 1-24

t1 7 channel-group 1 timeslots 1-24

t1 8 channel-group 1 timeslots 1-24

t1 9 channel-group 1 timeslots 1-24

t1 10 channel-group 1 timeslots 1-24

t1 11 channel-group 1 timeslots 1-24

t1 12 channel-group 1 timeslots 1-24

t1 13 channel-group 1 timeslots 1-24

t1 14 channel-group 1 timeslots 1-24

t1 15 channel-group 1 timeslots 1-24

t1 17 channel-group 1 timeslots 1-24

t1 18 channel-group 1 timeslots 1-24

t1 19 channel-group 1 timeslots 1-24

t1 20 channel-group 1 timeslots 1-24

t1 21 channel-group 1 timeslots 1-24

t1 22 channel-group 1 timeslots 1-24

t1 23 channel-group 1 timeslots 1-24

t1 24 channel-group 1 timeslots 1-24

t1 25 channel-group 1 timeslots 1-24

t1 26 channel-group 1 timeslots 1-24

t1 27 channel-group 1 timeslots 1-24

t1 28 channel-group 1 timeslots 1-24

Thanks for your help!

I have this problem too.
0 votes
Correct Answer by Paolo Bevilacqua about 7 years 1 month ago

Yes. You can reuse channel-group 0 for both, because the interface ID will discriminate anyway.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Paolo Bevilacqua Mon, 11/23/2009 - 08:19

Yes. You can reuse channel-group 0 for both, because the interface ID will discriminate anyway.

Actions

This Discussion