cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
705
Views
0
Helpful
1
Replies

Etherchannel to 2801 Router

infosateng
Level 1
Level 1

Hello

I want to setup redundancy on two links, one is 100meg fibre and the other 100meg Wireless.  I want to set this up with a 2801 and Ethernet module at one end and Switch at the other.  Do you see any problems setting up Etherchannel on these two types of connection, they are both the same speed.

Thanks

1 Reply 1

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello,

>> I want to setup redundancy on two links, one is 100meg fibre and the other 100meg Wireless.  I want to set this up with a 2801 and Ethernet module at one end and Switch at the other.  Do you see any problems setting up Etherchannel on these two types of connection, they are both the same speed.

not recommended performance and reliability of wireless link cannot compare with fiber use it as a backup link with higher STP costs

Hope to help

Giuseppe

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco