I have a question about Error message on the WS-X6248-RJ-45

Unanswered Question
Nov 23rd, 2009

Hi, there

What does it mean by below Err Msg ?

and  What is the Bus Asic ?


Do you happend to have the architecture of WS-X6248-RJ-45 ?




ㅁ Verson     : cat6000-sup2.6-4-13.bin

ㅁ supervisor : WS-X6K-SUP2-2GE

ㅁ Chassis    : C6509

ㅁ Err Msg   : %SYS-3-SYS_LCPERR3:Module 9: Bus Asic #0 out of sync error: Module requires attention - troubleshoot or contact TAC for assista.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Laurent Aubert Mon, 11/23/2009 - 20:09

Hi,


The bus ASIC is used to send packets for lookup. The port ASIC handles transmission and reception for several physical interfaces.


Please try one of the following workaround and if it doesn't make the message disappear, open an SR for RMA request:


1- Try to reset the LC

2- Try to reseat the LC


HTH


Laurent.

Kwangwon Seok Tue, 11/24/2009 - 16:52

Hi, Laurent.


I appreciate your help.


By the way,

There are 4 Coil Asics on the WS-X6248-RJ-45.

If Port Asic is Coil Asic, a group of ports should not work.

However, All the user who connect to the ws-x6248-rj-45 didn't work.

Leo Laohoo Mon, 11/23/2009 - 20:10

This error means that you need to contact Cisco TAC and organize for the blade in slot 9 to be RMA-ed.

ASIC stands for Applications Specific Integrated Circuit.

Actions

This Discussion