how i set SSH login on catalyst

Answered Question
Nov 24th, 2009
User Badges:

hello ,


i have catalyst 4507r and i want todevloped ssh login of telnet on catalyst


how i do?


when i give transport at that time its not shown me ssh how i got it ?

Correct Answer by Jon Marshall about 7 years 7 months ago

mitang.prajapati wrote:


hello ,


i have catalyst 4507r and i want todevloped ssh login of telnet on catalyst


how i do?


when i give transport at that time its not shown me ssh how i got it ?


You will need an IOS image on your switch that supports ssh ie. it will need a "k9" in the image name eg.


cat4500-ipbasek9-mz.122-46.SG.bin

cat4500-enservicesk9-mz.122-46.SG.bin


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Jon Marshall Tue, 11/24/2009 - 04:28
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

mitang.prajapati wrote:


hello ,


i have catalyst 4507r and i want todevloped ssh login of telnet on catalyst


how i do?


when i give transport at that time its not shown me ssh how i got it ?


You will need an IOS image on your switch that supports ssh ie. it will need a "k9" in the image name eg.


cat4500-ipbasek9-mz.122-46.SG.bin

cat4500-enservicesk9-mz.122-46.SG.bin


Jon

mitang.prajapati Tue, 11/24/2009 - 20:12
User Badges:

yes


i tell you my IOS image is cat4500-entservices-mz.122-37.sg.bin


now tell me what i do and how i configurer the image and SSH services on my catalyst switch


thanks

mitang

Jon Marshall Wed, 11/25/2009 - 02:26
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

mitang.prajapati wrote:


yes


i tell you my IOS image is cat4500-entservices-mz.122-37.sg.bin


now tell me what i do and how i configurer the image and SSH services on my catalyst switch


thanks

mitang


Mitang


Your image does not support SSH. You need to upgrade to the crypto image ie.


cat4500-entservicesk9-mz.122-37.sg.bin  <---- note the "k9" in the image name.


Jon

Jon Marshall Fri, 11/27/2009 - 04:42
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Mitang


Start from this page. Note that there may be an additional cost for the k9 version, you will need to check with your reseller -


http://tools.cisco.com/support/downloads/go/InterfaceModuleSWT.x?mdfid=277241600&mdfLevel=Model&treeName=Switches&modelName=Cisco%20Catalyst%204507R%20Switch&treeMdfId=268438038


Jon

mitang.prajapati Tue, 11/24/2009 - 20:14
User Badges:

in your sheet i cant not found  any thing that which i impliment on my switch


so plz tell me what i do for SSH on catalyst

csawest.dc Thu, 11/26/2009 - 08:50
User Badges:

for  SSH configuration use the following commands.


no ip source-route

no ip gratuitous-arps


username abc123 password cisco123

service password-encryption


ip domain-name yourdomain.com

crypto key generate rsa

ip ssh time-out 120

ip ssh authentication-retries 3


line vty 0 15

transport input ssh



hope to help.


Cheers!!!


Vaib...

Actions

This Discussion