need help configuring a sip phone (polycom ip310)

drosenbaum · ‎11-24-2009

I run cucm 7.0 and run a 100 or so sscp 7941's, as a test i need to configure one sip extension.

thank you

Dave

vpreenja · ‎11-30-2009

Either convert the existing sccp phone to Sip through BAT using the option - Migrating sccp to sip. Or configure the service parameter - Auto registeration protocol to be SIP and let the new 7941 sccp phone to auto register.

drosenbaum · ‎11-30-2009

My question was I have new polycomm phone it needs to be configured as a sip extension as a test, the rest of my phones are 7942 sccp phones

Naveen Raj Janardhan · ‎12-28-2009

Dave,

This is a little bit more complictaed than it seems and requires quite a bit of "tweaking". Look into the following link and try it out. Let me know if it works.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmcfg/b09sip3p.html#wpmkr1010498

Regards,

Naveen