11-25-2009 05:42 AM - edited 03-04-2019 06:47 AM
Hi I have a system that involves two devices plugged into a cisco asa 5540 firewall. A program on the device on the inside sends traffic to the device on the outside at a specific ip address 192.168.11.11 for instance. Is there a way that I can redirect this traffic to a different IP?
Thanks
interface GigabitEthernet0/0
nameif Outside
security-level 0
ip address 10.5.0.111 255.255.255.0
!
interface GigabitEthernet0/1
nameif Inside
security-level 100
ip address 10.10.0.10 255.255.255.0
igmp forward interface Outside
11-25-2009 05:50 AM
Hello,
unfortunately ASA doesn't support PBR policy based routing you need a router for this job.
see
http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/ip.html
Hope to help
Giuseppe
11-25-2009 06:56 AM
So there is no way to direct all traffic being sent to one IP to another on the ASA 5540?
11-25-2009 08:26 AM
Hi,
PBR is not availble in firewall but with applying nat you could achieve this. its all depends upon the infrastructure you have. if you tell me briefly what are the gateways and whether you have access to the gateways then i could see the possible way of doing that.
Regards
11-25-2009 08:44 AM
The gateway is 192.168.11.1 on the receiving computer.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: