Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator

Answered Question
Nov 25th, 2009

Hi All,

Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.

Any help would be greatly appreciated.

Thanks in advance.

Samir

Correct Answer by Joe Clarke about 7 years 2 months ago

Then RME will not be able to fetch the config.  RME will only use HTTPS for VPN 3000 devices.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Joe Clarke Wed, 11/25/2009 - 10:07

Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices.  RME will only use HTTPS to fetch VPN concentrator configurations.

samir_1976 Wed, 11/25/2009 - 12:12

Hi ,

But we are not using any HTTP/HTTPS credential for device.

Samir

Correct Answer
Joe Clarke Wed, 11/25/2009 - 13:44

Then RME will not be able to fetch the config.  RME will only use HTTPS for VPN 3000 devices.

Actions

This Discussion