cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2066
Views
5
Helpful
3
Replies

Line Card WS-X4448-GB-RJ45 on WS-C4506 Chassi [Incident: 091125-001196]

ch.koeber
Level 1
Level 1

Dear Sir or Madam,

I have a question regarding the WS-C4506 chassis.

Is it possible that a WS-X4448-GB-RJ45 line card to operate?

Sincerely,

Christopher Köber

c.koeber@spie.com

1 Accepted Solution

Accepted Solutions

Reza Sharifi
Hall of Fame
Hall of Fame

Chris,

I think your question is, is it possible to install a WS-X4448-GB-RJ45 in cat 4506.


Yes, see this document:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/module/guide/01overvw.html#wp1077306

HTH

Reza

View solution in original post

3 Replies 3

Reza Sharifi
Hall of Fame
Hall of Fame

Chris,

I think your question is, is it possible to install a WS-X4448-GB-RJ45 in cat 4506.


Yes, see this document:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/module/guide/01overvw.html#wp1077306

HTH

Reza

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Christopher,

yes it is supported see it is even supported in a C4006

sh module
Mod Slot Ports Module-Type               Model               Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1   1    2     1000BaseX Supervisor      WS-X4013            no  ok
2   2    48    10/100/1000 Ethernet      WS-X4548-GB-RJ45    no  ok
3   3    48    Inline Power Module       WS-X4148-RJ45V      no  ok
4   4    48    10/100BaseTx Ethernet     WS-X4148-RJ         no  ok
5   5    48    10/100/1000 Ethernet      WS-X4548-GB-RJ45    no  ok
>> 6   6    48    10/100/1000 Ethernet      WS-X4448-GB-RJ45    no  ok

with catos 8.4(11)GLX

and also on C4506

sh module
Chassis Type : WS-C4506

Power consumed by backplane : 0 Watts

Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
1     2  1000BaseX (GBIC) Supervisor(active)    WS-X4013+          JAE081161WP
2    48  10/100/1000BaseT (RJ45)                WS-X4548-GB-RJ45   JAE081169LZ
3    48  10/100/1000BaseT (RJ45)                WS-X4548-GB-RJ45   JAE081169NL
>>> 4    48  1000BaseX SFP                          WS-X4448-GB-SFP    JAB085103MM
5    48  10/100/1000BaseT (RJ45)                WS-X4548-GB-RJ45   JAE08491S7Z
6    48  10/100/1000BaseT (RJ45)                WS-X4548-GB-RJ45   JAE11097GZM

these are two devices in production

Hope to help

Giuseppe

Hi Giuseppe and Reza,

thanks for your answers.
We have a customer that have a Cat4006 Chassis with WS-X4448-GB-RJ45 line cards.

Since Cisco has discontinued the device, we want to offer customers a Cat4506.

Many thanks for the answer.

Sincerely,

Christopher

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco