11-26-2009 06:42 AM
Hi,
Despite of probe-failure the failure counter is not incremented. Is there any correlation between the configured probe and the failure counter?
(Custom script probe is used for this serverfarm)
# sh serverfarm xxxxxSt
serverfarm : xxxxxSt, type: HOST
total rservers : 2
---------------------------------
----------connections-----------
real weight state current total failures
---+---------------------+------+------------+----------+----------+---------
rserver: xxxxx6
10.222.0.90:8000 8 OPERATIONAL 13 157 0
rserver: xxxxx7
10.222.0.92:8000 8 PROBE-FAILED 0 0 0
Thanks,
Attila
Solved! Go to Solution.
11-29-2009 12:53 PM
Hi Attila,
The Connection Failure counter under show serverfarm is for Loadbalanced Connections which are failing.
If Probes are failing, this counter will not increment.
The Connection failure counter can increment for various reasons some of them are,
- Server not responding to the SYN packet sent by ACE for Loadbalanced connection
- Server sending Reset to the SYN packet sent by ACE for Loadbalanced connection
To check on stats for Probe, you can run "show probe
Hope this helps,
Best Regards,
Rahul
11-29-2009 12:53 PM
Hi Attila,
The Connection Failure counter under show serverfarm is for Loadbalanced Connections which are failing.
If Probes are failing, this counter will not increment.
The Connection failure counter can increment for various reasons some of them are,
- Server not responding to the SYN packet sent by ACE for Loadbalanced connection
- Server sending Reset to the SYN packet sent by ACE for Loadbalanced connection
To check on stats for Probe, you can run "show probe
Hope this helps,
Best Regards,
Rahul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide