Hello,
have a problem with the alias command.
When the router is in SRST mode, hunt-group configured, such as 2100, 2199 and 2198, does not work.
Here the relevant configuration:
voice translation-rule 1
rule 2 /^32\([0,3,7-9]\)\(.*\)/ /032\1\2/
rule 3 /^33\([0,3-9]\)\(.*\)/ /033\1\2/
rule 4 /^34\([0,3,6-9]\)\(.*\)/ /034\1\2/
rule 6 /^36\([0,3,6,8]\)\(.*\)/ /036\1\2/
rule 8 /^38\([0,3,8,9]\)\(.*\)/ /038\1\2/
rule 9 /^39\([0-3]\)\(.*\)/ /039\1\2/
rule 15 /^\(\)/ /00\1/
!
voice translation-rule 2
rule 1 /516182/ /2199/
rule 2 /516191/ /2110/
rule 3 /516191/ /2100/
rule 4 /516183/ /2198/
!
voice translation-profile AGGIUNGIZERO
translate calling 1
translate called 2
!
voice-port 0/0/0
translation-profile incoming AGGIUNGIZERO
disc_pi_off
compand-type a-law
cptone IT
timeouts interdigit 5
!
call-manager-fallback
secondary-dialtone 0
max-conferences 4 gain -6
transfer-system full-consult
timeouts interdigit 4
ip source-address 192.168.107.252 port 2000
max-ephones 24
max-dn 48 dual-line
system message primary BACKUP ATTIVO
system message secondary BACKUP ATTIVO
transfer-pattern .T
keepalive 10
alias 1 2100 to 2101 preference 1 cfw *2101 timeout 4 huntstop
alias 2 2199 to 2102 preference 1 cfw *2102 timeout 4 huntstop
alias 3 2198 to 2106 preference 1 cfw *2106 timeout 4 huntstop
call-forward pattern .T
call-forward pattern 0T
moh MOH-Company.au
multicast moh 239.1.1.1 port 16384 route 192.168.254.254 192.168.107.252
time-format 24
date-format dd-mm-yy
!
What I wrong?
Thank you!
