datacenter interconnection doubt

Unanswered Question
Nov 27th, 2009
User Badges:

Hi,


I need to interconnect two datacenters through a IP/MPLS network. I need to exchange the DB information between them and I see it's possible to use the EoMPLS technology for.

The problem is due to the fact that I don't have the SPA module with SIP 400 in Cat6509 as advised by Cisco but only the SUP720 10GE.

The question is: Could I implement the EoMPLS using only the SUP 720 10GE VSS?

Thank you in advance for your help.


Regards.


Giuseppe

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Fri, 11/27/2009 - 08:42
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Giuseppe,

we have recently implemented an EoMPLS using tengiga ports of a WS-X6708-10GE.


My understanding is that a SIP linecard or ES linecards are needed if you plan to use the xconnect under SVI interface.


if you want to use xconnect under a physical port or a vlan subinterface you should be fine.



Hope to help

Giuseppe

Actions

This Discussion