877 with NAT plus access-list

Unanswered Question
Nov 28th, 2009
User Badges:

I have 2 hosts behind an 877 running Apache's webserver.

How do I allow a report user access to both hosts?

I'm accessing one today but would like to access the other also and do not see a way

to do this in the current IOS.

I associate the TCP port 80 with translation between the dialer0 IP address assigned

by the service provider and the dynamic address of the host.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Giuseppe Larosa Sun, 11/29/2009 - 05:03
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Mike,

if you have only one public IP address, the one associated to dialer interface, your only option is that second server has to be mapped to another TCP port.

so the URL for the second server becomes string:

Hope to help


Ricardo Prado Rueda Thu, 12/03/2009 - 13:10
User Badges:
  • Cisco Employee,
  • Events Top Contributors,

    Cisco, 2014

Giuseppe is right. Since you have only one public address you need to use "port redirection", something like this:

ip nat inside source static tcp 80 8080

With this configuration you would access the server from Internet on the port TCP 8080, and the router will redirect this connection

to the server's port 80.




This Discussion

Related Content