11-29-2009 10:35 PM - edited 03-18-2019 10:51 AM
Hey Guys any reason why a bunch of VG224's wont register themselves to a subscriber during fail over? All ip phones and cipc work fine but VG's didnt register.
Any clues?
Solved! Go to Solution.
11-30-2009 01:10 AM
Hi,
Since you havent posted your configs, I think they should look like this for proper working:
!
sccp local FastEthernet0/0
sccp ccm
sccp ccm identifier 2 version
sccp
!
sccp ccm group 1
bind interface FastEthernet0/0
associate ccm 1 priority 1
associate ccm 2 priority 2
!
!
stcapp ccm-group 1
stcapp
!
Please post your configs and show sccp output if above config already exists.
Pratik
11-29-2009 11:47 PM
What would be the CM version and IOS version on VG?
Is this VG integrated with CM as SCCP or MGCP?
11-30-2009 12:33 AM
CUCM - 6.1.2.1002-1
VG - 12.4(15)T6 SCCP
11-30-2009 01:17 AM
Do you have the version keyword in the "sccp ccm" command on the VG?
Check - http://www.cisco.com/en/US/docs/ios/voice/command/reference/vr_s01.html#wp1293447
11-30-2009 01:10 AM
Hi,
Since you havent posted your configs, I think they should look like this for proper working:
!
sccp local FastEthernet0/0
sccp ccm
sccp ccm identifier 2 version
sccp
!
sccp ccm group 1
bind interface FastEthernet0/0
associate ccm 1 priority 1
associate ccm 2 priority 2
!
!
stcapp ccm-group 1
stcapp
!
Please post your configs and show sccp output if above config already exists.
Pratik
11-30-2009 12:10 PM
Are the Databases in Synch? Sounds like a DB Synch issue to me.
Liam
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide