11-30-2009 05:56 AM - edited 03-04-2019 06:49 AM
Hi,
Configuration register value for 3560 swicth. It shows 0Xf is there anything wrong with this value?
What is the significance of this value like in router config-reg value which we use to recover the password ?
Please share the experience.
Any link on cisco.com is highly appreciable.
Thanks in advance
Subodh
Solved! Go to Solution.
11-30-2009 06:07 AM
bapatsubodh wrote:
Hi,
Configuration register value for 3560 swicth. It shows 0Xf is there anything wrong with this value?
What is the significance of this value like in router config-reg value which we use to recover the password ?
Please share the experience.
Any link on cisco.com is highly appreciable.
Thanks in advance
Subodh
Subodh
0xf is the normal config register value for the 3560 switch. When you do a password recovery on the 3560 + others (see attached link), you do not reset the config register, instead you use the mode button on the front of the switch to go into ROMMON -
Jon
11-30-2009 06:07 AM
bapatsubodh wrote:
Hi,
Configuration register value for 3560 swicth. It shows 0Xf is there anything wrong with this value?
What is the significance of this value like in router config-reg value which we use to recover the password ?
Please share the experience.
Any link on cisco.com is highly appreciable.
Thanks in advance
Subodh
Subodh
0xf is the normal config register value for the 3560 switch. When you do a password recovery on the 3560 + others (see attached link), you do not reset the config register, instead you use the mode button on the front of the switch to go into ROMMON -
Jon
11-30-2009 06:55 AM
Hi,
Jon thanks for your information. It clears my confusion.
Thanks
subodh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide