cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
448
Views
0
Helpful
3
Replies

Req : maximum Security in cisco 2950 per port ( 1 port 48 users connectd)

csawest.dc
Level 3
Level 3

Dear Experts,

I have Cisco 2950 24 port Switch , i need maximum security per port, in this switch heavy user load on per port there are more than 40 users in per port.

Cisco 2950 Switch -----> fas/01 is uplink and fast03/ - 24 ports are connected to ------> 48 port DSLAM (means each port  connected with one 48 port DSLAM) per DSLAM 48 users that means in cisco 2950 per port  48 users connected through DSLAM------> ADSL modem in CPE.

i need maximum security in per port so how can i configure as per my required in cisco 2950 switch.maximum security

There are same VLAN (2) all ports, cause port 1 as a uplink from Billing Authenticaion server all users needs to authenticate through fast0/1 VLAN 2.

I have configured from fas0/3 to 24 port are protected port but i having flooding and collision. problem.

So please help me what is the configuation to control ( flooding / collision / storm / control .....).

Thanks in ADV,

Vaib...

1 Accepted Solution

Accepted Solutions

Leo Laohoo
Hall of Fame
Hall of Fame

You want a port to allow 48 users?  DO NOT configure port security then. DO NOT configre spanning-tree portfast.

If you really want to, try this:

switchport port-security
switchport port-security maximum 48
switchport port-security aging time 2
switchport port-security violation restrict
switchport port-security aging type inactivity
storm-control broadcast level 5.00
storm-control multicast level 5.00
no spanning-tree portfast

View solution in original post

3 Replies 3

Leo Laohoo
Hall of Fame
Hall of Fame

You want a port to allow 48 users?  DO NOT configure port security then. DO NOT configre spanning-tree portfast.

If you really want to, try this:

switchport port-security
switchport port-security maximum 48
switchport port-security aging time 2
switchport port-security violation restrict
switchport port-security aging type inactivity
storm-control broadcast level 5.00
storm-control multicast level 5.00
no spanning-tree portfast

Dear Experts,

Thank you very much for your great support , i'll try to do this and then let you know.

Thanks once again.

Cheers!!!

Vaib...

Please rate my post accordingly.  Thanks.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco