cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
470
Views
0
Helpful
3
Replies

Req : maximum Security in cisco 2950 per port ( 1 port 48 users connectd)

csawest.dc
Level 3
Level 3

Dear Experts,

I have Cisco 2950 24 port Switch , i need maximum security per port, in this switch heavy user load on per port there are more than 40 users in per port.

Cisco 2950 Switch -----> fas/01 is uplink and fast03/ - 24 ports are connected to ------> 48 port DSLAM (means each port  connected with one 48 port DSLAM) per DSLAM 48 users that means in cisco 2950 per port  48 users connected through DSLAM------> ADSL modem in CPE.

i need maximum security in per port so how can i configure as per my required in cisco 2950 switch.maximum security

There are same VLAN (2) all ports, cause port 1 as a uplink from Billing Authenticaion server all users needs to authenticate through fast0/1 VLAN 2.

I have configured from fas0/3 to 24 port are protected port but i having flooding and collision. problem.

So please help me what is the configuation to control ( flooding / collision / storm / control .....).

Thanks in ADV,

Vaib...

1 Accepted Solution

Accepted Solutions

Leo Laohoo
Hall of Fame
Hall of Fame

You want a port to allow 48 users?  DO NOT configure port security then. DO NOT configre spanning-tree portfast.

If you really want to, try this:

switchport port-security
switchport port-security maximum 48
switchport port-security aging time 2
switchport port-security violation restrict
switchport port-security aging type inactivity
storm-control broadcast level 5.00
storm-control multicast level 5.00
no spanning-tree portfast

View solution in original post

3 Replies 3

Leo Laohoo
Hall of Fame
Hall of Fame

You want a port to allow 48 users?  DO NOT configure port security then. DO NOT configre spanning-tree portfast.

If you really want to, try this:

switchport port-security
switchport port-security maximum 48
switchport port-security aging time 2
switchport port-security violation restrict
switchport port-security aging type inactivity
storm-control broadcast level 5.00
storm-control multicast level 5.00
no spanning-tree portfast

Dear Experts,

Thank you very much for your great support , i'll try to do this and then let you know.

Thanks once again.

Cheers!!!

Vaib...

Please rate my post accordingly.  Thanks.

Review Cisco Networking products for a $25 gift card