WLC 5508 and GLC-T problems

Unanswered Question
Nov 30th, 2009
User Badges:

Hi,

I have a big problem with my 5508 WLCs and GLC-T sfps:

I'm currently using 2 ports of my WLC with GLC-T sfp I trieb using both LAG and multiple interface.

When I have all my copper cables connected between my LAN and my WLC everithing is ok but if I cut the cable on WLC port number 1 still shows link UP and stop forwarding traffic.

The apparatus works normally if I take away the sfp module when the cabel is cut.

I thank you very much


Johnny

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Mon, 11/30/2009 - 14:09
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

I have no idea what firmware you have but there is a known bug on the 6.0.182.0 in regards to some of the Cisco SFPs are considered as "fake" or something.

Actions

This Discussion