1142 AP & ASA 5505

Unanswered Question
Dec 1st, 2009
User Badges:

I have the latest IOS installed on an 1142 AP.  I have the private secured SSID / VLAN working like a top.  I have a 2nd VLAN configured on my ASA for public access.  I also have the VLAN setup on the AP.  How do I get these two talking??  I'm assuming I have to assign my second VLAN to an interface on the ASA?  Any help would be appreciated!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
dancampb Tue, 12/01/2009 - 09:48
User Badges:
  • Cisco Employee,

Most likely you will want to make the interface you create on the ASA the default gateway for that VLAN.  Depending on how you have things setup you could either create a layer-2 only VLAN on the switched network running to the ASA so all traffic on the VLAN has to pass through the ASA, or you could just plug the AP into one of the ASA ports and enabled trunking.

peoriaparks Tue, 12/01/2009 - 10:20
User Badges:

I have a 2960 in the mix also.  So it is laid out like this:






1142 AP --------------TRUNK-----------------2960--------------TRUNK--------------ASA 5505.



Think I am missing a very small but vital piece.... Any ideas?

Actions

This Discussion

Related Content

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode