RRM changes in 6.0.188.0?

Unanswered Question
Dec 1st, 2009

Hi,

Anyone aware of any changes to RRM defaults or the RRM algorithm in 6.0.188.0 from 6.0.182.0?  I re-read the release notes and don't see anything that seems relevant...

I upgraded a couple 5508s over the weekend and have had 321 channel changes (70 total 1250 APs) and it reduced the number of APs at full-power by about 50% (in both bands).  Prior to the upgrade I'd see maybe one RRM event every week or two.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
George Stefanick Sat, 12/05/2009 - 07:35

Thus the reason i wont lead with RRM in my deployments, I do it the old fashion way ... STATIC power and channel.

I upgraded to .188 myself. I noticed out of the gate with RRM on the controller had all the APs at power 1 and only selected 5 channels and all the channels were set in DCA.

Who knows..

I dont like RRM..

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode