12-02-2009 06:28 AM - edited 07-03-2021 06:19 PM
Hi,
Is it possible to turn on both the radio interfaces Radio 0 and Radio 1. ( Radio0-802.11N2.4GHz, Radio1-802.11N5GHz ). For the SAME SSID. Access Point is 1250 series. Do we need any extra hardware for this?
Please share the experience.
Any link on cisco.com?
Thanks in advance
Subodh
12-02-2009 07:06 AM
Sure. I assume you're using an autonomous AP. The SSID is created in global config mode with the dot11 ssid commands. Then you apply the SSID to which radio interfaces you want with the interface command ssid XXXXX.
12-02-2009 08:07 AM
Hi,
Thanks for you reply. We are having autonomous AP. What will be the effect of turning on both teh radio interfaces for same SSID any benefit ?
Thanks
Subodh
12-02-2009 01:55 PM
Q: What will be the effect of turning on both teh radio interfaces for same SSID?
A: The SSID will be broadcasted on both radios AND you can enable 802.11n.
How will you be powering the AP? Power injector or standard PoE (15.4 watts) or PoE+?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: