12-03-2009 03:07 AM - edited 03-15-2019 08:39 PM
Hi all,
I have one CME (with SCCP ephones) configured to make outbound calls using a SIP line provided by and external SIP proxy, I just configured 4 credentials in sip-ua, so I can receive calls from 4 diferents numbers. But when I try to make outbound calls I only can make one call, because I configured just one authentication username) in the sip-ua configuration.
Is there any way to configure more users to use more than one line for outbound calls?
My actual configuration is something like this:
sip-ua
credentials username xxxx7 password 7 xxxxxxxxxxxxxxxx realm myISP.com
credentials username xxxx8 password 7 xxxxxxxxxxxxxxxx realm myISP.com
credentials username xxxx9 password 7 xxxxxxxxxxxxxxxx realm myISP.com
credentials username xxxx0 password 7 xxxxxxxxxxxxxxxx realm myISP.com
authentication username xxxx7 password 7 xxxxxxxxxxxxxxxx realm myISP.com
Is there a way to make more than one call using diferents users and passwords?
I heard something about using dial-peer pots, but all I can see is about Fxs ports or VG244 series, and I´m using only 7940 phones
Thanks in advance
Solved! Go to Solution.
12-10-2009 11:00 AM
Currently, there is no way to do that.
12-10-2009 11:00 AM
Currently, there is no way to do that.
02-16-2010 01:30 PM
This functionality will be available in 15.1.1T
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: