I have 5 static IPs from my isp and want to forward traffic from each IP to an internal NAT'ed IP.
MY SA 540-K9 is on 192.168.10.1 (the SA 540-K9 is not handling DHCP)
My DHCP server is on 192.168.10.2 and has vpn and sharepoint running fine on it. I had an old Dlink firewall router that handled the port forwarding fine, it was just very very slow so we bought this SA 540-K9
I want to send all trafic from the following external IPs to the internal Nat'ed IPs
188.8.131.52 to 192.168.10.254 all ports for a VOIP phone system
184.108.40.206 to 192.168.10.2 port 1723 or to allow windows vpn clients to vpn to a windows 2003 server
220.127.116.11 to 192.168.10.250 all ports
18.104.22.168 to 192.168.10.251 all ports
22.214.171.124 to 192.168.10.254 port 80 to allow web browser access to sharpoint running a windows 2003 server
The VOIP phone system works great, but no other firewall rules are allowing access.
Is there a place I need to add the additional WAN IPs before they can be added in the firewall rules since the only static IP in the SA 540-K9 is 126.96.36.199 as the WAN port and I am using that IP for the VOIP phone system.
Here is my current IPV4 firewall rules.
|Status||From Zone||To Zone||Service||Action||Source Hosts||Destination Hosts||Local Server||Internet Destination||Log||Edit|
Thank you for any help,