SR520 + IPsec VPN, and the negoiated IP.

Unanswered Question
Dec 3rd, 2009
User Badges:

I'm trying to get an IPSEC VPN up using CCA 2.1. I noticed in the console window this after attempting to create the VPN


2009.12.03-03:42:04-PST INFO isATMConfiguredForPPPoAandPPPoE() for ATM0
2009.12.03-03:42:04-PST DEBUG isATMConfiguredForPPPoAandPPPoE(): Returning false. No dialer associated with ATM0
2009.12.03-03:42:04-PST INFO isATMConfiguredForPPPoAandPPPoE() for ATM0
2009.12.03-03:42:04-PST DEBUG isATMConfiguredForPPPoAandPPPoE(): Returning false. No dialer associated with ATM0
2009.12.03-03:42:04-PST DEBUG isATMConfiguredForRFCSNAP(): Returning false. No IP Address configured on ATM0
2009.12.03-03:42:04-PST DEBUG isATMConfiguredForRFCSNAP(): No IP Address for ATM0
2009.12.03-03:42:04-PST DEBUG isATMConfiguredForRFCSNAP(): Returning false for ATM0
2009.12.03-03:42:04-PST DEBUG isATMConfiguredForRFCSNAP(): Returning false. No IP Address configured on ATM0
2009.12.03-03:42:04-PST DEBUG isATMConfiguredForRFCMUX(): No IP Address for ATM0
2009.12.03-03:42:04-PST DEBUG isATMConfiguredForRFCMUX(): Returning false for ATM


This is why things are failing, I think, because I'm set on negotiated IP. Can anyone confirm this?


Also, can anyone assist with the IPSEC creation or let me know what I'm doing wrong or where to look? I'm not even 100% sure which client I should be using to attempt the connection.


Thanks in advance guys.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Alexander_Wilson Thu, 12/03/2009 - 15:52
User Badges:

I should add towards the end, we have this:


2009.12.03-03:42:04-PST INFO isATMConfiguredForPPPoAandPPPoE() for ATM0.1
2009.12.03-03:42:04-PST INFO isConfigured() com.cisco.xdm.data.interfaces.Dialer
2009.12.03-03:42:04-PST DEBUG isConfigured(): Returning true for Dialer12  com.cisco.xdm.data.interfaces.Dialer
2009.12.03-03:42:04-PST DEBUG isATMConfiguredForPPPoE(): PPPoE connection. Checking Operating Mode for ATM0.1
2009.12.03-03:42:04-PST DEBUG isATMConfiguredForPPPoE(): Returning true ATM0.1
2009.12.03-03:42:04-PST DEBUG isATMConnected(): Returning true ATM0.1
2009.12.03-03:42:04-PST INFO isConfigured(): Returning truefor ATM interface ATM0.1  com.cisco.xdm.data.interfaces.AtmSubInterface
2009.12.03-03:42:04-PST INFO isConfigured() com.cisco.xdm.data.interfaces.Dialer
2009.12.03-03:42:04-PST WARNING isConfigured(): Returning false. No IP Address configured on Dialer interface Dialer10  com.cisco.xdm.data.interfaces.Dialer
2009.12.03-03:42:04-PST INFO isConfigured() com.cisco.xdm.data.interfaces.Dialer
2009.12.03-03:42:04-PST DEBUG isConfigured(): Returning true for Dialer12  com.cisco.xdm.data.interfaces.Dialer


I know ATM0.1 is my pppoe, I don't know what ATM0 is, or Dialer10 as its not an interface I think I'm using.


Again, I'm not even sure which client I'm supposed to use to connect, since they ask for ports, I wasn't aware IPSEC even uses ports.


Any info / help is appreciated. Thanks in advance.

Actions

This Discussion