12-04-2009 04:24 AM - edited 07-03-2021 06:19 PM
Hello,
can one controller 2100 be used to manage APs in the headquarter and in branches?
We plan to use 6 APs-1131 in the HQ and 4 APs-1131 in the branch. Is this scenario supported by a AIR-WLC2112-K9 in the HQ?
What do I have to check regarding the WAN (bandwidth, delay) and the LANs (Switches, VLANs,...)?
Thanks and regards
Matthias
12-05-2009 07:38 AM
What is your existing connectivity between the HQ and the Branch ?
12-11-2009 03:34 PM
Sure. You can use H-REAP.
H-Reap Design and Deployment Guide
http://www.cisco.com/en/US/products/ps6087/products_tech_note09186a0080736123.shtml
H-REAP Modes of Operation Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc3b8.shtml
Hybrid Remote Edge Access Point (H-REAP) Basic Troubleshooting
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008081103d.shtml
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: