Cisco ios upgaradation sup 2

Unanswered Question

Hi,

I am facing issue while converting Cat IOS to native IOS in WS-X6K-SUP2-2GE. Chassis is 7606.

In conversion procedure, we have to take this SUP in LAN (for ping TFTP Server). But Ethernet port is not in SUP.

Can I do this conversion through consol only?

Can I connect SUP with TFTP server (without Ethernet Port)


Regards,

Ikbal C

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Sat, 12/05/2009 - 03:52
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

[email protected]


Hi,

I am facing issue while converting Cat IOS to native IOS in WS-X6K-SUP2-2GE. Chassis is 7606.

In conversion procedure, we have to take this SUP in LAN (for ping TFTP Server). But Ethernet port is not in SUP.

Can I do this conversion through consol only?

Can I connect SUP with TFTP server (without Ethernet Port)


Regards,

Ikbal C


Ikbal


You could use xmodem from your laptop/PC to copy the IOS onto the SUP but be aware that it is not a quick process.


Jon

Actions

This Discussion