12-05-2009 08:30 AM - edited 03-04-2019 06:53 AM
My ISP requires that I be able to hard set the WAN port to 100Mbs Full Duplex. Is this possible with the WRVS4400N?
I see an option to set the switch ports but not the WAN port.
Thanks for any help
12-09-2009 02:42 AM
Hello Keith,
thanks to Conor that posted it in another thread there is an emulation of the GUI
http://ui.linksys.com/files/WRVS4400N/1.00.12/switch_vlan.htm
let's see under port settings it is possible see
http://ui.linksys.com/files/WRVS4400N/1.00.12/switch_port.htm
you just need to select 100 full in the Mode column
Hope to help
Giuseppe
12-09-2009 08:46 AM
Thanks, but that is the settings for the switch ports, I need to be able to set the WAN port to 100mbps Full Duplex
12-09-2009 10:56 PM
Hello Keith,
you are absolutely right.
it looks like there is no way to hardcode speed and duplex on wan port on the GUI
Hope to help
Giuseppe
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: