Hi,
UC520 log files are UTC time, sh clock has the correct time, deleted and created CNF files, didn't help. Rebooted UC520 and log shows that clock was updated from UTC to CST, downgraded fron 12.4.24T to uc500-advipservicesk9-mz.124-20.T2.bin, no change, any ideas ?
WebbUC500#sh log | i upda
000008: *Dec 6 15:24:54.455: %SYS-6-CLOCKUPDATE: System clock has been updated from 15:24:54 UTC Sun Dec 6 2009 to 09:24:54 CST Sun Dec 6 2009, configured from console by console.
Show clock shows corect time, but log doesn't:
WebbUC500#sh clock
09:41:23.875 CST Sun Dec 6 2009
WebbUC500#
WebbUC500#conf t
Enter configuration commands, one per line. End with CNTL/Z.
WebbUC500(config)#
WebbUC500#
000283: Dec 6 15:41:28.727: %SYS-5-CONFIG_I: Configured from console by admin on vty0 (192.168.1.101)
WebbUC500#
!
!
clock timezone CST -6
clock summer-time CST recurring
!
!
telephony-service
time-zone 8
!
!
Thanks
hasratraj
