Running WCS Base v6.0.170.0
Controllers running Software image 6.0.182.0
Attempt to run background task > Controller Configuration Backup leads to a failure for all controllers.
Error in the wcs.log file is as below :
12/04/09 14:15:05.992 ERROR[snmpmed] [51] MIB access failure : TransferConfig!10.7.2.16 : uploadMode : No access
12/04/09 14:15:05.992 ERROR[stspoll] [51] Controller Configuration Backup : SNMP operation related error during ConfigBackup, check whether the community is of read-only access. 10.7.2.16 MEDIATION-5,TransferConfig!10.7.2.16,uploadMode,No access
12/04/09 14:15:05.992 TRACE[com.aes] [51] [:] THROW
com.cisco.server.common.errors.IllegalOperationException: MEDIATION-5,TransferConfig!10.7.2.16,uploadMode,No access
at com.cisco.server.mediation.ModifyObject.processResponse(Unknown Source)
at com.cisco.server.mediation.SetOperation.sendPdu(Unknown Source)
at com.cisco.server.mediation.ModifyObject.invoke(Unknown Source)
at com.cisco.server.services.MediationService.modifyObject(Unknown Source)
at com.cisco.server.managedobjects.common.DeviceObject.setPropertyInDevice(Unknown Source)
at com.cisco.server.polling.PollConfigBackup.backupSwitch(Unknown Source)
at com.cisco.server.polling.PollConfigBackup.runTask(Unknown Source)
at com.cisco.common.task.AbstractTask.run(Unknown Source)
at com.cisco.common.scheduler.TaskSequence.run(Unknown Source)
at java.lang.Thread.run(Thread.java:595)
WCS shows Controller SNMP configuration to be Read-only, although RO & RW strings exist on the controllers. WCS does not pull the RW string in. Is this a compatability bug between the running version of WCS and the controller image ?
Thanks