Power replacement in Catalyst6509-E

Unanswered Question
Dec 6th, 2009
User Badges:

Hi All,


     I would like to know if we can replace the sockets in one of the power unit of C6509E(which has a redundant power supply) online.


Should I have to power down the chassis to replace the sockets in both the power units of C6509E?


Any documents for reference would be appreciated.


Thanks in advance,

Beno

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Ganesh Hariharan Mon, 12/07/2009 - 03:58
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

All Cisco Catalyst 6500 Series chassis hold up to two load-sharing, fault-tolerant, hot-swappable power supplies. Only one supply is required to operate a fully loaded chassis. If a second supply is installed, it operates in a load-sharing capacity. The power supplies are hot-swappable-a failed power supply can be removed without powering off the system.


Please check the following link from cisco:-


http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet0900aecd801c5c84.html


Hope this will solve your query !!


Regards

Ganesh.H

Actions

This Discussion