4404 upgrade bootloader to 5.2.157

Answered Question
Dec 7th, 2009

After upgrading the image on a 4404 I have downloaded the 5.2.157 bootloader as described in the release notes (http://www.cisco.com/en/US/products/ps6366/prod_release_notes_list.html) . However after downloading to the 4404, saving and rebooting a "show sysinfo" on the controller shows...

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 6.0.188.0
RTOS Version..................................... 6.0.188.0
Bootloader Version............................... 4.2.61.0
Emergency Image Version.......................... N/A
Build Type....................................... DATA + WPS

System Name...................................... xxxxxxx
System Location.................................. xxxxxxx
System Contact................................... xxxxxx

System ObjectID.................................. 1.3.6.1.4.1.14179.1.1.4.3
IP Address....................................... 10.41.0.3
System Up Time................................... 0 days 0 hrs 1 mins 39 secs
System Timezone Location......................... (GMT) London, Lisbon, Dublin, Edinburgh

Configured Country............................... GB  - United Kingdom
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +35 C

How can I get the bootloader to the correct level?


many thanks for any help,

Correct Answer by dancampb about 7 years 2 months ago

There has always been confusion on this.  The image you upgraded was not the bootloader but the Emergency Image.  The bootloader is bundled with the primary image and is upgraded if needed.  Now I see you are also running 6.0.188.0 which has a bug which is why your ER image version shows as N/A.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
dancampb Mon, 12/07/2009 - 06:20

There has always been confusion on this.  The image you upgraded was not the bootloader but the Emergency Image.  The bootloader is bundled with the primary image and is upgraded if needed.  Now I see you are also running 6.0.188.0 which has a bug which is why your ER image version shows as N/A.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode